Automotive Technologies

  1. Home
  2. Automotive Technologies
15187 Threads Posts
to

Worth reading in Automotive Technologies

Re: 99 Ranger 4.0L 4X4 Auto Trans

when the light flashes it means the overdrive module isn't working. on the tranny there should be a plug connected to t...
0 comments posted 23yrs
posted by eric_fi
0 comments posted 23yrs posted by eric_fi

Re: Unused Tempo Tranny Problem

>Subject: Unused Tempo Tranny Problem >From: Dan Szymborski snipped-for-privacy@baseballprimer.com >Date: 8/27/03 2:24...
0 comments posted 23yrs
posted by backncardr
0 comments posted 23yrs posted by backncardr

For a trip back to the muscle car days...

take a look here: http://www.classiccorvettes.com/ If you're ever in the Tampa area, it's worth a trip to their showroom...
2 comments posted 23yrs
posted by searn
2 comments posted 23yrs posted by searn

resistor or non-resistor plugs?

Asked this question yesterday but it was buried in a long post so you may have just skipped over it... What are the adv...
13 comments posted 23yrs
posted by njnagel
13 comments posted 23yrs posted by njnagel

overheating problems with a 91 Honda Accord

I have been having an overheating problem with my 91 Honda Accord. At first I thought it was because my radiator fan mo...
5 comments posted 23yrs
posted by nitt
5 comments posted 23yrs posted by nitt

Brake Vibration - Need diagnosis tips

Brake vibration in my '97 GTP is driving me nuts. I know Pontiac undersized the brakes in these cars but I went the fir...
7 comments posted 23yrs
posted by hennyhorowitz
7 comments posted 23yrs posted by hennyhorowitz

Tire Balancing Woes

1997 Toyota T100 2WD pickup. No problems with the wheel/body shaking. Then I bought a set of Dunlop "Range Rover TA" P2...
4 comments posted 23yrs
posted by <barry
4 comments posted 23yrs posted by <barry

Master Key Set for Mazda 626's?

I toy around with a lot of old Mazda 626's. Because I usually buy them at abandoned vehicle auctions they generally com...
2 comments posted 23yrs
posted by waughs
2 comments posted 23yrs posted by waughs

Ford 3.0 ('86 Taurus) Timing Tips?

I am trying to set the timing on an '86 Taurus 3.0 I got the mark (10 btdc) on the pulley chalked. I couldn't see where...
0 comments posted 23yrs
posted by waughs
0 comments posted 23yrs posted by waughs

Re: 99 s-10 (4.3l) - gauges went dead and no power...

> Seems like I had a nearly total power failure in my truck.. After > passing through an intersection, I shifted into 3...
1 comments posted 23yrs
posted by "sound(remove)"
1 comments posted 23yrs posted by "sound(remove)"

US source for 6BA screws?

I need some of this obscure British size for replacements. Can someone please suggest a place to buy them? Even the grea...
1 comments posted 23yrs
posted by spamctenos
1 comments posted 23yrs posted by spamctenos

1996 Ford Contour 2.0L Zetech - Mystery Stall!

Update on Cat-: Replaced by dealer. Continue to stall on cold/first start of morning. Dealer could not find anything. F...
2 comments posted 23yrs
posted by ckozicki
2 comments posted 23yrs posted by ckozicki

Re: Brakes squeaking every morning

This is rust that developped over the night on the surface of the discs. If you drive the car every day, pad will wear...
1 comments posted 23yrs
posted by nospam
1 comments posted 23yrs posted by nospam