it runs for 5 to 10 minutes and then stops for @ 20 minutes, i've replace filter and relay, when i shoot starting fluid into intake it kicks long enough to burn up the starting fluid only, HELP
- posted
15 years ago
it runs for 5 to 10 minutes and then stops for @ 20 minutes, i've replace filter and relay, when i shoot starting fluid into intake it kicks long enough to burn up the starting fluid only, HELP
Does the tach needle drop like a rock when it stalls? If so, check the engine wiring harness, if it hasn't been replaced, it will need to be.
so many possibilities, but might try looking at the fuel pump relay first... bad solder connections might work at first, but as they warm up, the connection breaks apart and the pump stops until things cool down a little...
could also be something plugging up the fuel intake in the tank... had that happen years ago in a Buick. Would run fine, then slowed down and stalled. Had to wait until some gunk floated away from the intake!....
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.