Jeep and Willys (new and old)

14215 Threads Posts
to

CJ7 wide or narrow?

Is the axle on a dana 30, on a wide track CJ, only longer on one side, or are both sides longer? Reason I'm asking is m...
5 comments posted 19yrs
posted by greglc84
5 comments posted 19yrs posted by greglc84

my 1983 CJ 8 (scrambler) wont start

I found a similiar post on this site from 1999 with the exact same scenario but cant locate where the guy got an answer...
7 comments posted 19yrs
posted by bateric
7 comments posted 19yrs posted by bateric

XJ lift pics, part 2

Installation and flex pics, for those who are interested. http://s33.photobucket.com/albums/d96/carlsaiyed/ Carl
0 comments posted 19yrs
posted by carlsaiyed
0 comments posted 19yrs posted by carlsaiyed

1994 Jeep Grand Cherokee limited

Hi, I have the above mentioned vehicle It has no lifts or mods of any type and has the 15 inch stock rims on it.Will 30...
1 comments posted 19yrs
posted by Fred7038
1 comments posted 19yrs posted by Fred7038

86 XJ tranny swap

Will the tranny from an 86 XJ bolt up to a 93 yj, both 4 bangers from their respective years? AMC to Chrysler? Greg
2 comments posted 19yrs
posted by Gregginn7
2 comments posted 19yrs posted by Gregginn7

Oh boy, what's that noise?

'97 TJ, 4.0, roughly 130-140k on the odometer. Bear with me, as I'm trying to narrow down the source of a persistent en...
5 comments posted 19yrs
posted by jongoddard
5 comments posted 19yrs posted by jongoddard

BULLFROG CLUTCH

I have what seems to be an ongoing problem with my clutch. Here is the short version: I have a 2006 Wrangler X with the...
25 comments posted 19yrs
posted by brainart
25 comments posted 19yrs posted by brainart

Ignition switch/lock problem

My 96 XJ has something like 330k on it and the ignition switch and lock has never given any trouble until today. Got in...
6 comments posted 19yrs
posted by JeffDeWitt
6 comments posted 19yrs posted by JeffDeWitt

AC Clutch 1996 Grand Cherokee Laredo

My AC clutch is burned up. Can I replace it without losing freon? Thanks in advance. Barry
5 comments posted 19yrs
posted by barry_owen
5 comments posted 19yrs posted by barry_owen

Junk Yards in MD

I remember a salvage/junk yard in MD where you pull your own part, pay a dollar to get in, flat rate for all parts. I ca...
6 comments posted 19yrs
posted by brianhubley001
6 comments posted 19yrs posted by brianhubley001

Governor Pressure Sensor Voltage (P1762, P1764)

Hi All, I changed the tranny fluid and filter in my wife's 1997 Grand Cherokee a few weeks ago. While I had the pan off...
4 comments posted 19yrs
posted by googlegroups
4 comments posted 19yrs posted by googlegroups

clutch chatter/rattle noise

here's the full history. 5 years ago my dad and i rebuilt the sr-4 tranny (stuck in 3rd gear) in my 80, cj7. it crapped...
11 comments posted 19yrs
posted by jpurl77
11 comments posted 19yrs posted by jpurl77

91 jeep wrangler

Question.. Have 91 jeep wrangler it makes gear grinding noise and will not go into reverse except in 4low which it works...
6 comments posted 19yrs
posted by u36029
6 comments posted 19yrs posted by u36029