okay..
this morning. started the car.. as i pulled away the car felt like the brakes had stuck on.. so gave it a little power and it "came loose"
little did i know.. about 2m up the driveway i dropped a pinion from the final drive.. or at least half of it... along with various bits of gearbox shell..
drove 19 miles :D got to work.. and im driving along.. and 3rd starts making a reverse gear kinda noise.... then 4th starts.. and as i get into work.. 2nd does..
pop the bonnet at work. and look under the car.. oil is dripping out... so.. its at work still and i dunno what to do.. scrap it and get another car.. or pay for a 3rd gearbox (the gearbox went about 4,000 miles ago.. and was replaced with a scrapped SRi gearbox
K reg mark1 405 estate 1.9 litre carb
i matched up the pinion with the haynes manual. its defo from the final drive.. tis about 3cm in diamater.. and well. i have 2 bits of it :/ so.. as its punched through the gearbox. replace the gearbox? or scrap it for either another 405/406 (i do love the handling on the 405.. and i belive the 406 is the same car.. just restyled/more toys)
so very gutted :( i just put 4 new wheels on it too