Have you ever started to do a job and wish you'd never started?
Tries to change the stereo in the 90 to a different one this afternoon....
Wish i had not bothered.
To cut a long story short does any one know where the -ve, ignition +ve and the permanent +ve go into the stereo? The ISO connector has long gone by the previous owner so i have no idea!
Any help or url's appriciated!
Mark.
Sorry, its a 90 90!
Mark.
In article , Mark Solesbury writes
I hate to say it, but you could get another ISO plug with labelled tails from Halfrauds. They're usually only 10-15 UKP (cheaper if you shop around), and it's probably well worth tidying it all up.
It'll be the neatest solution too, especially if you solder the tails and insulate with heatshrink.
Regards,
Simonm.
On or around Fri, 06 Jan 2006 19:55:23 GMT, SpamTrapSeeSig enlightened us thusly:
this is what I did on the car - makes a lot of sense, only thing is you then need adapters if you get a radio with one of the other standards... but the adapters are available as well, if necessary.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required