im trying to sourc someone who can supply me with a thermometer that i can fit in the water jacet/hose on my series and have the readout in the cab,
maplins, bardwells and the plumb centre have no idea what im on about,
can anyone point me in the right direction for one
much obliged
Andy
______________________________________________________________________ Posted Via Uncensored-News.Com - FAST UNLIMITED DOWNLOAD -
Smiths industrial make a decent capilary gauge with a 3/8 BSP fitting that will fit in the hole in the cylinder head by the thermostat housing. Try a decent plant hire company.
Paul
Just a dumb question - but why in the radiator? The temperature will be up and down faster than a lady of the streets knickers. There is a fitting on the engine that accepts a wide range of heat sensors - electrical and mechanical.
--
because, ( i think ) that i could monitor water temp in real time, and see immediatly any problems.
im not convinced the rads doing a good enough job at the minuite what with a 2.8 diesel in with the standard rad,
alls fine in normal use but stick the van on the back and go up a hill or two and the temp gauge shows a drastic rise in temp.
just wanted to keep a more detailed eye on it.
andy
______________________________________________________________________ Posted Via Uncensored-News.Com - FAST UNLIMITED DOWNLOAD -
Have something to add? Share your thoughts — no account required.
Ask the community — no account required