Automotive Technologies

  1. Home
  2. Automotive Technologies
15187 Threads Posts
to

Worth reading in Automotive Technologies

fuse "bridge"???

Hi there, I'm looking for a gadget that I'm not sure even exists. I want to build an ignition immobilizer for my 1988 N...
3 comments posted 23yrs
posted by geoff
3 comments posted 23yrs posted by geoff

Using a drill pump to drain Tranny fluid

Is this a feasible way of doing it without taking the pan off? The drill pumps I have seen takes a 1/2 inc hose but the...
5 comments posted 23yrs
posted by nonactiveaccount
5 comments posted 23yrs posted by nonactiveaccount

Replacing Sable Brake Hose

I have a 1987 Mercury sable with a leaking front right brake hose. I have purchased an after market replacement (dealer...
1 comments posted 23yrs
posted by jrodda
1 comments posted 23yrs posted by jrodda

1990 volkswagen golf gl v- belt removal

Will someone advise if both the alternator hanger bolt and mounting bolt need to be loosened in order to remove v-belt?...
0 comments posted 23yrs
posted by bigchili66
0 comments posted 23yrs posted by bigchili66

How hard..Rad replace on 93 Buick Regal....

Hello. I seem to have a bad radiator on my 93 Buick Regal 3.8. Once hot and under pressure its leaking from around the...
5 comments posted 23yrs
posted by gghs1981
5 comments posted 23yrs posted by gghs1981

97 Kia Sephia needs a new exhaust.

I need to replace some parts of my exhaust (pre-muffler and the pipe connecting to the muffler). I'd like to do it for...
1 comments posted 23yrs
posted by steve
1 comments posted 23yrs posted by steve

1996 Blazer alternator replacement....PLEASE HELP

1996 Blazer 4.3L 4WD I had the alternator tested and found out it was bad. The mechanic quoted me $275 to replace it. I...
6 comments posted 23yrs
posted by chrishanson00
6 comments posted 23yrs posted by chrishanson00

T-stats - oil sump & coolant temps?

There are statements in the archives that 190F to 230F oil sump temperature is the ideal range for most engines. Others...
1 comments posted 23yrs
posted by alancemorREMOVE
1 comments posted 23yrs posted by alancemorREMOVE

87 Buick Electra "blower motor power module"

Hi, A few months ago I had asked someone about a problem with the blower not shutting off even when the ignition had be...
1 comments posted 23yrs
posted by he1vis
1 comments posted 23yrs posted by he1vis

Random engine stops and Cosmic Rays

Is there anyone else on this list that has recently had their engine just up and die for no good reason? I ask because...
16 comments posted 23yrs
posted by Colombo
16 comments posted 23yrs posted by Colombo

68 Plymouth

Are the wheel studs on the left right handed and the studs on the right left handed? Or what?
16 comments posted 23yrs
posted by hondacycle305
16 comments posted 23yrs posted by hondacycle305

Re: No oil pressure in 360! help

>> >> >> >> > installed a motor ive had sitting for a year on the weekend, it started >> > up fine except that there wa...
1 comments posted 23yrs
posted by suprdave
1 comments posted 23yrs posted by suprdave

@#$ GM cam sensor

I was just wondering on any GM vehicle with a cam sensor, obd1--obd11, whatever, and you think the sensor may be the ca...
2 comments posted 23yrs
posted by oilyspill
2 comments posted 23yrs posted by oilyspill

93 Lesabre ByPass Hose Problem

Hi All: Here is another lame Mr Goodwrench design: Last year I replaced all hoses except for the bypass because I didn'...
1 comments posted 23yrs
posted by finiteguy_nospam
1 comments posted 23yrs posted by finiteguy_nospam