Volkswagen, hot (Aircooled)

  1. Home
  2. Volkswagen, hot (Aircooled)
11263 Threads Posts
to

Tires for 1979 Westfalia Camper

I would like to get some recommendations for new tires for my '79 Westfalia Camper. I've checked the listings at http:/...
3 comments posted 17yrs
posted by Robert
3 comments posted 17yrs posted by Robert

Did you see the wooden Beetle?

Friend of mine sent me this link, from Gizmodo: http://gizmodo.com/5035194/wooden-volkswagen-beetle-gives-us-woodenly-t...
0 comments posted 17yrs
posted by hqbibb
0 comments posted 17yrs posted by hqbibb

Generator Red Light -- all ready?

I have a 68' bug with a 1500 engine in it. Several years ago I started experiencing some electrical problems and I went...
9 comments posted 17yrs
posted by steve.ballantyne
9 comments posted 17yrs posted by steve.ballantyne

mixing crank, pistons and heads...

I have a 40 HP case which I put the crank from a 1600. I also plan on putting 8505 mm (1600) Pistons/cyl's. Can I use th...
1 comments posted 17yrs
posted by mpernice95
1 comments posted 17yrs posted by mpernice95

can a head 'boss' be repaired?

I have a 2 year old head which I damaged when I was removing it. I didn't realize that one of the nuts wasn't loosened....
5 comments posted 17yrs
posted by mpernice95
5 comments posted 17yrs posted by mpernice95

Hey Halatos@gmail.com

i gotta run out and vacuum down an A/C system I installed on an old musclecar this morning.. post me a few replies to ke...
23 comments posted 17yrs
posted by Joey
23 comments posted 17yrs posted by Joey

King pin clearance?

I am reaming my king pin bushings, bentley says .7.092-7.099, taking it up about .001 at a time, at 7.09 the king pins...
3 comments posted 17yrs
posted by fixer33
3 comments posted 17yrs posted by fixer33

Generator Question;

why the small wire from the generator body over to the ground on the regulator? I've got a K.G. running w/o it. It must...
8 comments posted 17yrs
posted by georgewkspam
8 comments posted 17yrs posted by georgewkspam

Cip1 Torque Tool - Do They Break Easily?

Cip1 Torque Tool - Do They Break Easily? Hello! I have a tool that is similar to the Torquemeister. It is called the TO...
8 comments posted 17yrs
posted by Jim347a
8 comments posted 17yrs posted by Jim347a

Inflated your tires lately? a petition

http://act.truemajorityaction.org/p/7002/tirepressure?petition_KEY=76 do something today! Your tires may last longer too...
120 comments posted 17yrs
posted by georgewkspam
120 comments posted 17yrs posted by georgewkspam

Towing capacity

Does any one know what the towing capacity was/is for a split bus? I might be putting in a 1600 into it if that makes a...
2 comments posted 17yrs
posted by sanddollar3
2 comments posted 17yrs posted by sanddollar3

Blue Loctite Removal - Help Please!

Hello! How do you chemically remove 'Blue Loctite'? I applied some to the terminals on my VDO dual terminal oil pressur...
3 comments posted 17yrs
posted by Jim347a
3 comments posted 17yrs posted by Jim347a

Sunday's Baja trip

I took the Baja out and met up with 3 Jeeps and a Ford Explorer on '79 Bronco axles. We hit some of the better trails,...
0 comments posted 17yrs
posted by test_spamgourmet
0 comments posted 17yrs posted by test_spamgourmet

Wiring Harness

All, Well I finally re-started the work on my '73 Super after taking over a year off! My question is: should I replace...
9 comments posted 18yrs
posted by blackyourhair1988
9 comments posted 18yrs posted by blackyourhair1988