What is the best treatment for waterproofing a S3 LWB 109 canvas.Thanks in advance Ted.
- posted
19 years ago
What is the best treatment for waterproofing a S3 LWB 109 canvas.Thanks in advance Ted.
I tried PVA glue many years ago, Sealerbond or wood glue, watered down about 50/50 (trial and error, you might want to do it different, or aply a second coat at a different ratio) and brushed on. It did a good job but make sure it is washed off paintwork while still set as it stained mine. it was NATO matt green though so might not affect gloss as much. Wet the canvas first to help it break surface tension. It dries clear and slightly darker. I think you had to apply second coat while still damp, if you felt it needed it.
There is some good green woodstain in the DIY sheds that is supposed to be a good match for NATO green, apparently been tried with some success.
All the best
In message , snipped-for-privacy@lardrover.co.uk writes
Or if you want an easier option, a 5 litre can of Thompson's waterseal from Wick's, Jewson's or wherever is cheapest at the time and slop it all over. It also waterproofs olive drab very well turning it into a darker olive not-so-drab!. Works well, canvas stays flexible, *much* cheaper than 'Fabsil' which is the bees bits for this job. If you read the Thompson's application guides for waterproofing, it lists brick, wood, concrete *and* textiles ... good stuff.
or ,,, if you want to use the correct stuff, get 5 litres of FABSIL from most good outdoor activity suppliers, spray on.
towsure have some on their web site
andy
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.